XR3 New Model Plus .300 Length
XR3 New Model Plus .300 Length

XR3 New Model Plus .300 Length

review
0
0
5
Your Price: $350.00
Part Number:NM XR3

Choose Options

Grip Frame Style
Inner Cut help
Plus .300
Plus .300 MINUS
Add Middle Pin help
Yes
A recreation of the original Pre 1962 XR3 geometry and grip panel shape with a slightly enlarged outer perimeter for fitting Panels! Panel Alignment Pin is in the original location.
A small Modification is required to the trigger spring on the XR3 because of the shallow placement of the top of the back strap. The trigger spring stud had to be moved forward 100 thousandths of an inch to mimic the shape properly and have enough platen for the grip panel to rest on! 300 thousands of an inch longer on the bottom that allows a great deal of modification capability to the overall pattern.

Available with the extra material, Example below on the left OR larger inner cut to remove extra weight on the right. 
Also note, the two alignment holes in the lower middle of the frame on each side of the part number designation are all
in the same location. Use the 2 holes to reference the difference between the two frames. Example below: The plus Uses
the same grip panel mount hole location as the original however the Plus/Minus has been moved down .300!
Mid Pin Option is available.
Plus .300 (Left), Plus .300 Minus (Right)    (Example is XR3 Red, your frame would be an XR3)

Related Items

 
 

Recently Viewed Items