A recreation of the XR3 RED (Redesign) for 1963 and forward with a slightly enlarged outer perimeter for fitting panels!
.300 thousands longer on the bottom that allows a great deal of modification capability to the overall pattern.
Available with the extra material, Example below on the left OR larger inner cut to remove extra weight on the right.
Also note, the two alignment holes in the lower middle of the frame on each side of the part number designation are all
in the same location. Use the 2 holes to reference the difference between the two frames. Example below: The plus Uses
the same grip panel mount hole location as the original however the Plus/Minus has been moved down .300!
Mid Pin Option is available.
Plus .300 (Left), Plus .300 Minus inner weight (Right)